- توضیحات
- نظرات (0)
توضیحات
The DS1100 is a compact BASIC-programmable controller targeting cost-sensitive serial-over-IP and serial control applications.
Built around the same T2000 ASIC as our EM500 “MiniMo” module, the DS1100 offers a single-channel RS232 port. Device power can be supplied via its power jack, pin9 of the DB9 (serial port) connector, or the optional power-over-Ethernet board.
There are three LEDs on the device’s front: green and red main status LEDs, and a yellow Ethernet link LED.
Each DS1100 is supplied with the DIN rail and wall mounting plates.
Specifications:
- Superior upgrade to the DS203 device.
- Based on the second-generation ASIC (T2000).
- 10/100BaseT auto-MDIX Ethernet port.
- Optional power-over-Ethernet.
- Single-channel RS232 port on DB9M connector:
- TX, RX, RTS, CTS, DTR, and DSR lines;
- Baudrates of up to 115200bps;
- None/even/odd/mark/space parity modes;
- 7/8 bits/character modes;
- Optional RTS/CTS flow control;
- “12V” power input on pin 9 of the DB9.
- 512KB flash memory for firmware and application.
- 200 bytes of EEPROM space for data storage.
- Three LEDs:
- Green and red main status LEDs;
- Yellow Ethernet link LED.
- Power: 12VDC nominal (min. 9V, max. 18V).
- Dimensions: 90x48x25mm.
- Operating temperature range: -5 ~ 70 C.
- Firmware is upgradeable through the serial port or network (including cold upgrade firmware uploads through the network).
- CE- and FCC-certified.
Included Accessories:
DIN rail mounting plate
Wall mounting plate and two screws
Optional Accessories:
12V/0.5A adaptor: APR-P0011 (US), APR-P0012 (EU), APR-P0013 (UK)
WAS-1499 straight Ethernet cable*
WAS-P0004(B) DB9M-to-DB9F serial cable (device-to-PC)
WAS-P0005(B) DB9F-to-DB9F serial cable (device-to-device)
The device comes preloaded with a fully functional serial-over-IP application
نقد و بررسیها
هنوز بررسیای ثبت نشده است.